1. Home
  2. Products
  3. Power Cable
  4. 0.6/1KV PVC/XLPE Insulated Power Cable

0.6/1KV PVC/XLPE Insulated Power Cable

Insulated Conductor/ Insulated Wire/ Transmission Cable

Characteristic
These insulated power cables are suitable for use in three-phase five-wire transmission and distribution power systems. Separating the neutral wire from the ground wire is available for the stable operation of the system and safety of the operator.

Product Application
It is suitable to use for transmission and distribution electric circuit in power systems with rated voltage up to 0.6/1kV.

Type and designation
Type Designation standard
Copper core Aluminium core
VV,YJV VLV,YJLV Copper (aluminum) PVC insulation PVC jacketing power cable IEC60502-1
VV22,YJV22 VLV22,YJLV22 Copper (aluminum) steel strip armoring PVC insulating and jacketing power cable GB/T12706.1
VV32, YJLV32 VLV32, YJLV32 Copper (aluminum) thin steel wire armoring PVC insulating and jacketing power cable Q/321023KLA3.2
VV42, YJV42 VLV42, YJLV42 Copper (aluminum thick steel wire armoring PVC insulating and jacketing power cable Q/321023KLA6.2
Note: the products also contain flame-retardant type and fire-resistant type (except for aluminum), and their properties are in accordance with the flame-retardant and fire-resistant requirements in GB/T18380 and GB/T19216 respectively.
Specification
Type Rated Voltage No. of cores Nominal cross-section
Copper core Aluminium core mm2
VV 、 VV22 、 VV32 、 VV42 、 YJV 、 YJV22 、 YJV32 、 YJV42 VLV 、 VLV22 、 VLV32 、 VLV42 、 YJLV 、 YJLV22, 、 YJLV32 、 YJLV42 0.6/1KV 1 1.5 ~ 1000 2.5 ~ 300 10 ~ 300
VV 、 VV22 、 VV32 、 VV42 、 YJV 、 YJV22 、 YJV32 、 YJV42 VLV 、 VLV22 、 VLV32 、 VLV42 、 YJLV 、 YJLV22, 、 YJLV32 、 YJLV42 2 1.5 ~ 185 2.5 ~ 185 4 ~ 185
VV 、 VV22 、 VV32 、 VV42 、 YJV,YJV22 、 YJV32 、 YJV42 VLV 、 VLV22 、 VLV32 、 VLV42 、 YJLV 、 YJLV22 、 YJLV32 、 YJLV42 3 1.5 ~ 300 2.5 ~ 300 4 ~ 300
V 、 VV22 、 VV32 、 VV42 、 YJV 、 YJV22 、 YJV32 、 YJV42 VLV 、 VLV22 、 VLV32 、 VLV42 、 YJLV 、 YJLV22 、 YJLV32 、 YJLV42 4,3+1,5,4+1,3+2 4 ~ 300

Property parameter
1. Conductor DC resistance meets GB/T3956 standards.
2. Finished cable shall pass the AC voltage (50Hz, 5min, 3500V) test without breakdown. Water-immersion voltage resistant test is for the single core cable with no armor.
3. Insulation resistance
4. Flame-retardant test
Finished cable shall meet the flame-retardant property test requirement stipulated in IE60332-3 and GB/T18380.3.
5. Fire-resistance test
Finished cable shall meet the fire resistant test requirements stipulated in IEC60332-21 and GB/T19216.21.

Insulation resistance
No. Property PVC insulation
1 ρΩ·cm volume resistivity 
rating operating temperature 20℃ of the cable
10 13 
10 10
2 Ki MΩ·km insulation resistance constant Ki 
rating operating temperature 20℃ of the cable
36.7 
0.037
Inquiry Form